• Adhesive Abro Epoxy Clear epoxy-4 minute EC-510 14,2g

Ask a question about this product

I wish to not have this question published
Adhesive epoxy ABRO (EC-510) for use in the home and the vehicle. Bonds interior car trim, moldings, as well as jewelry, porcelain, glass and most plastics. After drying, it remains invisible. Is resistant to water, detergents and most solvents. Application: A pin or any sharp object perforate outlet tube sealant. The repaired surface must be cleaned of dirt, dried and degreased. Squeeze tubes of equal portions of base and hardener and mix thoroughly until a uniform color. Mix only the amount that will be immediately used as curing time kleya- 4 minutes. Apply a thin layer of the mixture on both surfaces. The mixture will be warm until until cured. To grasp the material clamps are not required, you only need to gently squeeze the glued parts. No glue at a temperature below 10 & deg; FROM.
  • Product Questions (0)
  • There are no reviews for this product.

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Adhesive Abro Epoxy Clear epoxy-4 minute EC-510 14,2g

    • Brand: Abro
    • Product Code: 1551
    • Availability: In Stock
    • 75₴


    Last Viewed